rustup: the Rust toolchain installer
rustup installs The Rust Programming Language from the official release channels, enabling you to easily switch between stable, beta, and nightly compilers and keep them updated. It makes cross-compiling simpler with binary builds of the standard library for common platforms. And it runs on all platforms Rust supports, including Windows.
- How rustup works
- Keeping Rust up to date
- Working with nightly Rust
- Directory overrides
- Toolchain specification
- Working with Rust on Windows
- Working with custom toolchains
- Working with HTTP proxies
- Environment variables
- Other installation methods
rustup and other standard tools
bin directory. On Unix it is located at
$HOME/.cargo/bin and on Windows at
is the same directory that
cargo install will install Rust programs
and Cargo plugins.
This directory will be in your
$PATH environment variable, which
means you can run them from the shell without further
configuration. Open a new shell and type the following:
If you see something like
rustc 1.7.0 (a5d1e7a59 2016-02-29) then
you are ready to Rust. If you decide Rust isn't your thing, you can
completely remove it from your system by running
rustup self uninstall.
Enable tab completion for Bash, Fish, or Zsh
rustup now supports generating completion scripts for Bash, Fish,
and Zsh. See
rustup help completions for full details, but the
gist is as simple as using one of the following:
# Bash $ rustup completions bash > /etc/bash_completion.d/rustup.bash-completion # Fish $ rustup completions fish > ~/.config/fish/completions/rustup.fish # Zsh $ rustup completions zsh > ~/.zfunc/_rustup
Note: you may need to restart your shell in order for the changes to take effect.
zsh, you must then add the following line in your
How rustup works
rustup is a toolchain multiplexer. It installs and manages many
Rust toolchains and presents them all through a single set of tools
cargo installed to
~/.cargo/bin are proxies that delegate to the real
rustup then provides mechanisms to easily change the
active toolchain by reconfiguring the behavior of the proxies.
rustup is first installed running
rustc will run the proxy
$HOME/.cargo/bin/rustc, which in turn will run the stable
compiler. If you later change the default toolchain to nightly with
rustup default nightly, then that same proxy will run the
Keeping Rust up to date
Rust is distributed on three different release channels: stable,
beta, and nightly.
rustup is configured to use the stable channel by
default, which represents the latest release of Rust,
and is released every six weeks.
When a new version of Rust is released, you can type
rustup update to update
$ rustup update info: syncing channel updates for 'stable' info: downloading component 'rustc' info: downloading component 'rust-std' info: downloading component 'rust-docs' info: downloading component 'cargo' info: installing component 'rustc' info: installing component 'rust-std' info: installing component 'rust-docs' info: installing component 'cargo' info: checking for self-updates info: downloading self-updates stable updated: rustc 1.7.0 (a5d1e7a59 2016-02-29)
This is the essence of
Keeping rustup up to date
rustup update also checks for updates to
rustup and automatically
installs the latest version. To manually check for updates and install the
latest version of
rustup without updating installed toolchains type
rustup self update:
$ rustup self update info: checking for self-updates info: downloading self-updates
Working with nightly Rust
Rustup gives you easy access to the nightly compiler and its
experimental features. To add it just run
rustup install nightly:
$ rustup install nightly info: syncing channel updates for 'nightly' info: downloading toolchain manifest info: downloading component 'rustc' info: downloading component 'rust-std' info: downloading component 'rust-docs' info: downloading component 'cargo' info: installing component 'rustc' info: installing component 'rust-std' info: installing component 'rust-docs' info: installing component 'cargo' nightly installed: rustc 1.9.0-nightly (02310fd31 2016-03-19)
Now Rust nightly is installed, but not activated. To test it out you can run a command from the nightly toolchain like
$ rustup run nightly rustc --version rustc 1.9.0-nightly (02310fd31 2016-03-19)
But more likely you want to use it for a while. To switch to nightly
globally, change the default with
rustup default nightly:
$ rustup default nightly info: using existing install for 'nightly' info: default toolchain set to 'nightly' nightly unchanged: rustc 1.9.0-nightly (02310fd31 2016-03-19)
Now any time you run
rustc you will be running the
With nightly installed any time you run
rustup update, the nightly channel
will be updated in addition to stable:
$ rustup update info: syncing channel updates for 'stable' info: syncing channel updates for 'nightly' info: checking for self-updates info: downloading self-updates stable unchanged: rustc 1.7.0 (a5d1e7a59 2016-02-29) nightly unchanged: rustc 1.9.0-nightly (02310fd31 2016-03-19)
Directories can be assigned their own Rust toolchain with
rustup override. When a directory has an override then
cargo is run inside that directory,
or one of its child directories, the override toolchain
will be invoked.
To pin to a specific nightly:
rustup override set nightly-2014-12-18
Or a specific stable release:
rustup override set 1.0.0
To see the active toolchain use
rustup show. To remove the override
and use the default toolchain again,
rustup override unset.
rustup commands deal with toolchains, a single installation
of the Rust compiler.
rustup supports multiple types of
toolchains. The most basic track the official release channels:
'stable', 'beta' and 'nightly'; but
rustup can also install
toolchains from the official archives, for alternate host platforms,
and from local builds.
Standard release channel toolchain names have the following form:
<channel>[-<date>][-<host>] <channel> = stable|beta|nightly|<version> <date> = YYYY-MM-DD <host> = <target-triple>
'channel' is either a named release channel or an explicit version number, such as "1.8.0". Channel names can be optionally appended with an archive date, as in 'nightly-2014-12-18', in which case the toolchain is downloaded from the archive for that date.
Finally, the host may be specified as a target triple. This is most useful for installing a 32-bit compiler on a 64-bit platform, or for installing the MSVC-based toolchain on Windows. For example:
$ rustup install stable-x86_64-pc-windows-msvc
For convenience, elements of the target triple that are omitted will be inferred, so the above could be written:
$ rustup install stable-msvc
Toolchain names that don't name a channel instead can be used to name custom toolchains.
Rust supports a great number of platforms. For many of these
platforms The Rust Project publishes binary releases of the standard
library, and for some the full compiler.
rustup gives easy access
to all of them.
When you first install a toolchain,
rustup installs only the
standard library for your host platform - that is, the architecture
and operating system you are presently running. To compile to other
platforms you must install other target platforms. This is done
rustup target add command. For example, to add the
$ rustup target add arm-linux-androideabi info: downloading component 'rust-std' for 'arm-linux-androideabi' info: installing component 'rust-std' for 'arm-linux-androideabi'
arm-linux-androideabi target installed you can then build
for Android with Cargo by passing the
--target flag, as in
cargo build --target=arm-linux-androideabi.
rustup target add only installs the Rust standard library
for a given target. There are typically other tools necessary to
cross-compile, particularly a linker. For example, to cross compile
to Android the Android NDK must be installed. In the future,
will provide assistance installing the NDK components as well.
To see a list of available targets,
rustup target list. To remove a
rustup target remove.
Working with Rust on Windows
rustup works the same on Windows as it does on Unix, but there are
some special considerations for Rust developers on Windows. As
mentioned on the Rust download page, there are two ABIs in use
on Windows: the native (MSVC) ABI used by Visual Studio, and the GNU
ABI used by the GCC toolchain. Which version of Rust you need depends
largely on what C/C++ libraries you want to interoperate with: for
interop with software produced by Visual Studio use the MSVC build of
Rust; for interop with GNU software built using the MinGW/MSYS2
toolchain use the GNU build.
When targeting the MSVC ABI, Rust additionally requires an installation of Visual Studio 2013 (or later) or the Visual C++ Build Tools 2015 so rustc can use its linker. For Visual Studio, make sure to check the "C++ tools" option. No additional software installation is necessary for basic use of the GNU build.
By default rustup on Windows configures Rust to target the 32-bit MSVC
ABI, that is the
i686-pc-windows-msvc target triple. More
specifically, the toolchains that rustup chooses to install, unless
told otherwise through the toolchain specification, will be compiled
to run on a
i686-pc-windows-msvc host, and will target that platform
by default. When you write
rustup update nightly, rustup interprets
rustup update nightly-i686-pc-windows-msvc. You can change this
rustup set default-host or during installation.
$ rustup set default-host x86_64-pc-windows-msvc
Since the MSVC ABI provides the best interoperation with other Windows software
it is recommended for most purposes. The GNU toolchain is always available, even
if you don't use it by default. Just install it with
$ rustup install stable-gnu
You don't need to switch toolchains to support all windows targets though; a single toolchain supports all four x86 windows targets:
$ rustup target add x86_64-pc-windows-msvc $ rustup target add x86_64-pc-windows-gnu $ rustup target add i686-pc-windows-msvc $ rustup target add i686-pc-windows-gnu
Working with custom toolchains and local builds
For convenience of developers working on Rust itself,
rustup can manage
local builds of the Rust toolchain. To teach
rustup about your build,
$ rustup toolchain link my-toolchain path/to/my/toolchain/sysroot
For example, on Ubuntu you might clone
~/rust, build it, and then run:
$ rustup toolchain link myrust ~/rustg/x86_64-unknown-linux-gnu/stage2/ $ rustup default myrust
Now you can name
my-toolchain as any other
toolchain. Create a
rustup toolchain for each of your
rust-lang/rust workspaces and test them easily with
rustup run my-toolchain rustc.
rust-lang/rust tree does not include Cargo, when
is invoked for a custom toolchain and it is not available,
will attempt to use
cargo from one of the release channels,
preferring 'nightly', then 'beta' or 'stable'.
Working with HTTP proxies
Enterprise networks often don't have direct outside HTTP access, but enforce
the use of HTTP proxies. If you're on such a network, you can request that
rustup uses a proxy by setting its URL in the environment. In most cases,
http_proxy should be sufficient. On a Unix-like system with a
shell like bash or zsh, you could use:
On Windows, the command would be:
If you need a more complex setup, rustup supports the convention used by the curl program, documented in the ENVIRONMENT section of its manual page.
||Set the default toolchain to the latest nightly|
||List all available targets for the active toolchain|
||Install the Android target|
||Remove the Android target|
||Run the nightly regardless of the active toolchain|
||Shorthand way to run a nightly compiler|
||Run a shell configured for the nightly compiler|
||On Windows, use the MSVC toolchain instead of GNU|
||For the current directory, use a nightly from a specific date|
||Install a custom toolchain by symlinking an existing installation|
||Show which toolchain will be used in the current directory|
%USERPROFILE%/.multirust) Sets the root rustup folder, used for storing installed toolchains and configuration options. (rustup used to be called multirust. Use of
.multirustis a holdover from that. See #537.)
RUSTUP_TOOLCHAIN(default: none) If set, will override the toolchain used for all rust tool invocations. A toolchain with this name should be installed, or invocations will fail.
https://static.rust-lang.org) Sets the root URL for downloading static resources related to Rust. You can change this to instead use a local mirror, or to test the binaries from the staging directory.
https://static.rust-lang.org/dist) Deprecated. Use
https://static.rust-lang.org/rustup) Sets the root URL for downloading self-updates.
Other installation methods
The primary installation method, as described at www.rustup.rs, differs by platform:
- On Windows, download and run the rustup-init.exe built for
i686-pc-windows-gnutarget. Despite being built against the GNU toolchain, the Windows build of rustup will install Rust for the MSVC toolchain if it detects that MSVC is installed. If you prefer to install GNU toolchains or x86_64 toolchains by default this can be modified at install time, either interactively or with the
--default-hostflag, or after installation via
rustup set default-host. In general, this is the build of rustup one should install on Windows.
- On Unix, run
curl https://sh.rustup.rs -sSf | shin your shell. This downloads and runs
rustup-init.sh, which in turn downloads and runs the correct version of the
rustup-initexecutable for your platform.
rustup-init accepts arguments, which can be passed through
the shell script. Some examples:
$ curl https://sh.rustup.rs -sSf | sh -s -- --help $ curl https://sh.rustup.rs -sSf | sh -s -- --no-modify-path $ curl https://sh.rustup.rs -sSf | sh -s -- --default-toolchain nightly
If you prefer you can directly download
rustup-init for the
platform of your choice:
MSVC builds of
rustup additionally require an installation of
Visual Studio 2015 or the Visual C++ Build Tools 2015. For
Visual Studio, make sure to check the "C++ tools" option. No
additional software installation is necessary for basic use of
the GNU build.
To install from source just run
cargo run --release. Note that
currently rustup only builds on nightly Rust, and that after
installation the rustup toolchains will supersede any pre-existing
toolchains by prepending
~/.cargo/bin to the
rustup is secure enough for the non-paranoid, but it still needs
rustup performs all downloads over HTTPS, but does not
yet validate signatures of downloads.
Is this an official Rust project?
Yes. rustup is an official Rust project. It is the recommended way to install Rust at www.rust-lang.org.
How is this related to multirust?
Can rustup download the Rust source code?
The Rust source can be obtained by running
rustup component add rust-src.
It will be downloaded to the
directory of the current toolchain.
rustup fails with Windows error 32
If rustup fails with Windows error 32, it may be due to antivirus scanning in the background. Disable antivirus scanner and try again.
Copyright Diggory Blake, the Mozilla Corporation, and rustup contributors.
Licensed under either of
- Apache License, Version 2.0, (LICENSE-APACHE or http://www.apache.org/licenses/LICENSE-2.0)
- MIT license (LICENSE-MIT or http://opensource.org/licenses/MIT)
at your option.
- Fork it!
- Create your feature branch:
git checkout -b my-new-feature
- Commit your changes:
git commit -am 'Add some feature'
- Push to the branch:
git push origin my-new-feature
- Submit a pull request :D
For developing on
rustup itself, you may want to install into a temporary
directory, with a series of commands similar to this:
$ cargo build $ mkdir home $ RUSTUP_HOME=home CARGO_HOME=home target/debug/rustup-init --no-modify-path -y
You can then try out
rustup with your changes by running
affecting any existing installation. Remember to keep those two environment variables
set when running your compiled
rustup-init or the toolchains it installs, but unset
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.